Due to high demand, please be advised that your shipment may be delayed. In order to set realistic expectations, please reference the shipping updates below.
Any Bell helmet determined by Bell to be defective in materials or workmanship within one (1) year from the date of original purchase will be repaired or replaced, at Bell’s option, free of charge when received at the factory freight prepaid, together with proof of purchase. If you have questions regarding the warranty coverage on your helmet, call us at 800-456-2355, e-mail us at email@example.com or refer to your helmet owner’s manual.
Some small parts can be purchased on this site — look for the "accessories" section under the Powersports or Cycling sections. For all other parts, call us at 800-456-2355 or e-mail us at firstname.lastname@example.org; we'll be happy to help!
We do not presently sell ECE rated helmets in the US or on this website at this time.
Each Bell helmet is certified for specific activities and should only be used for those sports. Almost all helmets listed in the cycling section of this website are ONLY for cycling, with the exception of the Segment, Faction and Fraction helmets which are certified for skate use as well as cycling. For auto racing helmets, please visit http://www.bellracing.com.
Bell does not recommend paints or solvents of any kind be used on the helmets. They can damage a helmet so that its protective capabilities are significantly reduced.
Bell has a general recommendation of replacing your helmet every three (3) years. If you are unsure of the condition of your helmet, or whether it should be replaced, call us at 800-456-2355 or e-mail us at email@example.com for information on a free inspection.
Helmets don’t last forever. If the helmet is visibly damaged (cracked outer shell, crushed or cracked foam liner or any other damage) don’t use it. Some or all of the helmet’s protective capacity is used up when impacted, and the damage to a helmet is not always visible. If you have any questions about your helmet call 800-456-2355 or e-mail us at firstname.lastname@example.org.
After each use, allow the helmet to air dry and then store it in a cool, dry place where it won’t get damaged.
Note: Excessive heat can damage your helmet. For example, in direct sunlight a dark gear bag, the interior of a car, or an automobile trunk can get hot enough to cause heat damage (damaged helmets will appear to have uneven or bubbly surfaces). Therefore, when not being used for a period of time we recommend that the helmet be placed back into its box or case and stored in a cool, dry place.
If you have any questions as to the condition of your helmet please call 800-456-2355 or e-mail us at email@example.com for information on a free inspection.
Cleaning Your Helmet
Helmets are made of materials that can be damaged by many commonly available cleaners. Petroleum based solvents or cleaners are especially dangerous. They can damage a helmet so that its protective capabilities are significantly reduced. Many times this damage is not visible. For best results, clean the helmet using a soft cloth or sponge, warm water and mild soap (such as a mild dish soap).
We get inquiries from day care centers or from people who share their helmets, and are concerned about lice infestation. Here’s a simple, effective way to get rid of them:
Bell Powersports (Motorcycle) helmets carry a 5 year warranty, Bell Cycling and Skate helmets carry a 1 year warranty.
A modern Bell helmet, retention system and fit system is a sophisticated structure. Replacing the fit system could possibly compromise the helmet’s ability to stay properly in place in the event of a crash, which could result in injury. For this reason we opt to replace the entire helmet in case of a warranty claim, and with this in mind design durable, reliable retention systems.
Bell's Crash Replacement Program is available to customers in the United States as well as those in some European countries.
Remember: Never wear a helmet that’s been involved in an accident.